Rechargeable Jump Start with FCC

Rechargeable jump start with FCC
Instructions for use:

1. Select the appropriate voltage and connector for the electronic device to charge/power supply.
2. Press the switch to start charging when your device connected with Epower, if you unplug
The cable, auto-sleep will start in one minute.
3. Five lights will flash circularly during the charging by Epower and all lights will keep bright
When your device is full-charged.
4. During the charging for your device, LED lights indicate the balance power of built-in
Battery of Epower, Four lights indicate 80% balance, three lights indicate 60% balance,
Two lights indicate 40% balance and one light indicates 20% balance. The built-in battery
Is empty when all LED lights start to flash. 5. Press the switch five seconds to start if you want to use LED for illumination and select
The status (light, strobe, SOS and close) by pressing the switch to transform.
6. Store the product in a cool and dry place and away direct sunlight.

Special note:

1. To start 12V cars, please make sure at least THREE LED lights of EPOWER are bright
2. Connect the red battery clip to the battery positive (+) and black clip to the battery
Negative (-) and insert the plug into e-power.
3. Turn the ignition switch to start position.
4. Once the car is started, disconnect the plug and remove the battery clips within 30s.
Specifications of jump starter:
Battery capacity: 13800mAH
Input: 12V---1A
Output: 5V---2A; 12V---2A; 19V---3.5A(Three options)